经常有朋友问小编,线路板打样怎么收费的,这里小编来详细的说一说线路板打样的价格。
线路板打样分为特价板和非特价板,这里小编以普通的单双面板为例,来详细的的讲一讲线路板打样是怎么收费的。
特价板标准:板层为单双面板,材料为FR4,尺寸长宽在10*10cm以内,板厚要求在0.8-1.6mm之间,工艺要求为普通喷锡,油墨颜色为绿油白字,数量为10PCS以内,最小线宽线距为0.15mm/0.15mm,最小孔径为0.3mm。
只要满足以上特价板的标准线路板打样价格都为50元,不包邮。
非特价板标准:板层为单双面板,材料为FR4,尺寸长或宽有一边已经超过了10cm,板厚要求在0.8-1.6mm之间,工艺要求为普通喷锡,油墨颜色为绿油白字,数量为10PCS以内,最小线宽线距为0.15mm/0.15mm,最小孔径为0.3mm。
只要是长或宽任意一边超过了10cm,线路板打样收费标准要按以下的执行。工程费50元+板费,比如尺寸按13*16cm来计算,单价是0.05元/平方厘米,那么就是13(长)*16(宽)*0.05(单价)=10.4元,然后10.4元(单片价格)*10PCS(数量)=104元,工程费50元+板费104元=154元,那么此款超出特价范围的线路板打样费用为154元。
如还有不明白的地方,可以联系遇见电路的客服为您解答。