-
高频线路板加工需要注意的要点
发布时间:2022-08-30 | 信息来源:遇见电路(深圳)有限公司一般情况,高频可定义为频率在1GHz以上;高频电路板对材料、工艺制作要求比普通的要高很多。那么,高频线路板加工需注意哪些问题呢?下面小编就与大家一起分享一下:
1、阻抗控制要求比较严格,相对线宽控制很严格,一般公差百分之二左右。
2、由于板材特殊,所以PTH沉铜的附着力不高,通常需要借助等离子处理设备等先对过孔及表面进行粗化处理,以增加PTH孔铜和阻焊油墨的附着力。
3、做阻焊前不能磨板,不然附着力会很差,只能用微蚀药水等粗化。
4、板材多数是聚四氟乙烯类材料,用普通铣刀成型会有很多毛边,需专用铣刀。
5、采用电磁频率较高的特种电路板,频率在1GHz以上。
以上内容由遇见电路小编整理分享,希望通过本文的介绍能帮助到大家。
上一篇:线路板抄板的具体步骤相关资讯