-
混压电路板厂家浅析PCB电路板不均匀的坏影响
发布时间:2022-05-16 | 信息来源:盖尔(深圳)电子发展有限公司PCB线路板工艺很复杂,尤其是在制造线路板的时候一定需要真空层压机,为的就是降低压力减少线路板上面的流胶溢出,在这个过程中尽量保证足够的树脂量,树脂量会直接影响线路板的质量与使用寿命,所以树脂多一点,那么εr会低些,控制层压厚度公差,因为PCB多层线路板板厚不均匀,就表明介质厚度变化,会直接影响到线路板的Z0。
通常情况下咱们会根据客户需求对电路板的型号选择相对应的材料,如果制造厂商在型号、εr不对、板厚不均匀,哪怕厂商在制造过程中全部正确,那么这样的线路板同样也是报废的,既浪费人力、时间与物料,又赚不到钱。
另一方面就是PCB线路板表面的阻焊还直接影响到信号的接收,会直接降低接收信号的来源,如果线路板上面的阻焊太厚的话,虽然影响不是很大,但是还会导致线路板上面铜导线的一些接触面,不是接触空气值较高就是过低,主要原因还是因为线路板表面上面的阻焊不均匀造成的。
以上便是混压电路板厂家盖尔小编总结的关于“PCB电路板不均匀的坏影响”的介绍,希望对大家有所帮助,更多PCB资讯请关注我们。
上一篇:线路板抄板是怎么抄的相关资讯